1 Introduction topenlarge
Before proceeding with definitive repairs, the patient must be fully resuscitated, fully evaluated, and fit for anesthesia and surgery by a prepared team.
Successful definitive treatment requires reduction and fixation of both the posterior and anterior injuries, generally completed in a single definitive procedure.
Complete pelvic ring instability may be obvious when displacement is gross, but it may also be occult, when initial displacement has been hidden by elastic recoil, poor imaging studies, or successful reduction by a pelvic binder.
This illustration shows inlet and outlet oblique views, with posterior and proximal translational displacement of a right sacro iliac fracture dislocation, with associated pubic symphysis disruption. Rotational deformity and instability, may also be present.
Emergency care for pelvic ring injuries should be available and preplanned at every trauma hospital. Patients with complex pelvic ring injuries may need to be referred to a specialized center. Definitive care of complex pelvic ring injuries may be centralized so that patient referral may need to be considered.
Lumbo-sacral nerve root injury
Before undertaking definitive treatment of pelvic ring injuries, It is essential to know the functional status of the patient's lumbosacral nerve roots. A careful and detailed examination is necessary, to assess perineal sensation, voluntary anal sphincter contraction, and bulbo-cavernosus reflex. Cystometrography may be helpful to assess bladder neuromotor function.
Neurologic abnormalities should be correlated with anatomic site of injury:
If a lumbo-sacral nerve deficit is present, further investigation and possible treatment must be considered.
Early pelvic realignment
Early recognition and at least partial correction of deformity is helpful, because the mobility of the pelvic fragments decreases with swelling and hematoma organization. Circumferential wrapping as soon as possible can help correct external rotation and lateral displacement. If proximal displacement is present, traction applied to the lower extremity can improve it. Such provisional corrections are best applied early during the patient's care, before swelling and hematoma consolidation progress. External fixation, if used for initial care may similarly aid subsequent definitive reduction.
The posterior component of this injury is a fracture through the posterior ilium.
The specific techniques of reduction and fixation will depend upon the sites of injury, the fracture pattern and displacement, as well as patient factors and available resources.
At least one site of anterior arch disruption is almost always present, involving
- pubic symphysis disruption
- body fracture
- pubic ramus fracture
Their displacement and instability range from slight to extreme.
In general, pubic symphysis disruption, especially with significant displacement, should be treated with open reduction and internal fixation. Pubic ramus fractures, whose instability may be limited by soft tissue restraints may be treated with internal or external fixation. Their reduction may help reduce posterior arch displacement, and their fixation contributes to overall pelvic ring stability.
2 Preoperative planning top
An explicit, written pre-operative plan is strongly encouraged. The following provides an outline of recommended steps.
Assess and consider:
- Whole patient (physiologic status and other injuries)
- Pelvic region & organ systems (local details of pelvic region including soft tissues and related organ system injuries)
X-rays and CT scans (reviewed in detail for patients individual anatomy, each injury, and overall pelvic configuration)
for patients individual anatomy, each injury, and overall pelvic configuration)
Identify and list each individual pelvic ring injury
For each injury, determine displacement, stability, and a strategy for reduction and fixation (relevant techniques are outlined and discussed below).
List, in order, each step of your planned procedure
Finally review the step-by-step list to:
- Confirm plan
- List equipment and implants
- Consider potential problems and solutions
- Share the plan with other members of the operative team – including nursing staff, radiographic technician, and anesthesia staff.
- Minimizing the amount of additional soft tissue damage and operative blood loss is important. Efficient use of surgical time is required to avoid excessively long procedures.
- Sufficient blood replacement must be available. Intraoperative blood salvage should be considered.
3 Patient preparation top
Combined supine and prone
If it is necessary to change positions intraoperatively (from supine to prone position or vice versa), the surgeon must choose the order for performing the procedures. This information must be communicated to the other members of the surgical and anesthesia teams.
In cases where both anterior and posterior approaches are required, simultaneous access is not possible. Thus, it is important not to apply fixation that might prevent satisfactory reduction of remaining ring injury components.
After completion of the initial procedure, in this example, the posterior one, the incision is closed, and a dressing applied.
The patient is turned “like a log” supine onto an adjacent stretcher.
The patient is then transferred, with a roller, sliding board or sheet, back onto the operating table.
The anterior operative area is prepared and draped as necessary.
If an anterior procedure to be performed first, followed by a posterior approach, the sequence is reversed, and the patient turned and transferred in a similar fashion.
4 Reduction top
Once the injury sites have been identified and clarified with appropriate imaging studies, the surgeon can prepare for definitive deformity correction and pelvic fixation.
Reduction maneuvers follow the sequence below until satisfactory reduction is achieved at each site of deformity:
- external manipulation
- percutaneous control and manipulation of displaced pelvic segments
- open reduction
If it is possible to obtain a satisfactory reduction without open exposure, and the bony injuries can be stabilized with percutaneous fixation techniques, this is preferable, to avoid additional blood loss and reduce the risk of wound healing problems.
Open surgery may be necessary to achieve satisfactory alignment or fixation. If so, the specific surgical approach should be planned according to the site of injury and chosen fixation technique. While preliminary reduction maneuvers may be helpful, the final direct reduction occurs after exposure.
It may be possible to achieve a satisfactory reduction of both anterior and posterior ring with initial ORIF of one site.
Restoration of overall pelvic alignment must be monitored with inlet and outlet imaging during reduction and fixation, and not lost sight of during repair of individual fractures.
Definitive reduction of iliac fracture
After achieving the best possible closed reduction with manipulation of the ipsilateral lower extremity, the exposed iliac fracture is reduced directly with clamps, possibly aided with a joy stick (Schanz screw) in the anterior ilium.
Fracture impaction may first need to be corrected with an appropriate elevator or bone spreader.
Anatomic reduction of the iliac fracture will often produce a satisfactory alignment of pubic ramus fractures, which can then be treated without direct exposure.
ORIF of pubic symphysis disruption, if performed first, will assist with reduction of the iliac facture.
5 Fixation topenlarge
Iliac wing reduction and fixation
The pubic symphysis plate is indicated for symphyseal disruption and/or pubic body fractures. A supplementary screw or longer plate may be needed to stabilize a tilt fracture, which involves both symphysis and superior ramus.
Pubic ramus fractures have several options.
If alignment is satisfactory, they can be treated with external fixation until they are healed:
Alternatively, percutaneous intramedullary screw fixation can be performed to avoid external fixator complications and inconvenience. This can be done either retrograde as illustrated or antegrade.
If closed reduction of pubic ramus fractures is not satisfactory, open reduction should be considered.
- Anterior approach to the symphysis (medial fractures)
- Modified Stoppa approach (for lateral ramus fractures, or to apply the plate on the posterior surface of the ramus.)
6 Check of osteosynthesis topenlarge
Check the completed osteosynthesis with Imaging, and physical exam if there is any question about pelvic stability.
Using inlet and outlet views, with the C-arm, confirm that pelvic deformity has been corrected and that involved sacroiliac joints and pubic symphysis are anatomically reduced.
Unless a C-arm with a large field of view is available, it may be wise to obtain similarly oriented portable x-rays of the entire pelvis, to be certain about overall alignment.
Confirm that reduction of each fracture or joint injury is satisfactory. Make sure that all fixation devices are properly placed, and that each screw is of appropriate length. Multiple views are typically needed, including both axial and perpendicular views for questionable screws. If screws protrude from bone, consider risks to nerves, vessels, and adjacent viscera, especially urethra and bladder after pubic symphysis repair.