1 Preliminary remarks top
C3 fractures, with extensive comminution of coronoid and radial head are characteristic of posterior olecranon fracture dislocation. Lateral collateral ligaments are typically disrupted. Restoration of elbow stability requires repair of the proximal ulna, radial head ORIF, or replacement, and lateral collateral ligament repair.
A coronoid fragment, if present, may be reduced and fixed through the olecranon fracture and/or a medial extension of the usual posterior approach. Then the remainder of the proximal ulna must be reduced and fixed. Radial fracture repair or replacement follows.
While it may be possible to reduce the multifragmentary ulna fracture anatomically, occasionally length can be determined better from the radius, after fixation or replacement.
Stability of the elbow must be confirmed at the conclusion of reduction and fixation. If instability remains, supplementary external fixation may be necessary.
2 Principles of bridge plating top
Absolute stability is desirable for articular fractures. However, this may not be possible in multifragmentary fractures of the proximal ulna. Every effort should still be directed at anatomical reduction and absolutely stable fixation of the major articular surface fragments, particularly the coronoid process. Compression will deform the articular surface, so it no longer fits the trochlea. In this situation, the fracture must be bridged without compression to preserve size and shape of the olecranon fossa. Small interfragmentary screws or K-wires may improve stability.
A bridge plate is analogous to locked intramedullary nail fixation of a comminuted shaft fracture. In multifragmentary fractures of the olecranon, anatomical reconstruction of the articular surface itself is the primary goal. Intermediate, nonarticular fragments do not need to be reduced anatomically. Cancellous bone graft can be used to support the articular fragments and fill defects.
Directly manipulate only the articular fragments. Excessive manipulation of intermediate fragments risks disturbing their blood supply. If the soft tissue attachments are preserved, and the fragments are relatively well aligned, healing is predictable. Alignment of the main fragments can usually be achieved indirectly utilizing traction and soft tissue tension.
Mechanical stability, provided by the bridging plate, is adequate for indirect healing (callus formation).
3 Reduction topenlarge
Through a posterior incision, release the joint capsule medially and laterally at the fracture site. With direct visualization, manipulate and anatomically reduce the articular fragments. Use the distal humerus as a template for reduction. Provisionally fix the fragments with 1.0 mm K-wires.
Reduce the proximal part of the olecranon with pointed reduction forceps and temporarily hold the reduction with one or two K-wires.
Insert all K-wires in a position where they do not interfere with the planned plate and screws.
Control reduction with direct visualization of the sigmoid notch and the posterior cortex of the olecranon, and confirm with C-arm fluoroscopic control.
4 Plate preparation topenlarge
Use a 3.5 dynamic compression plate (DCP), reconstruction plate, limited contact dynamic compression plate (LC-DCP), or locking plate (LCP). The reconstruction plate is the least durable, and should be used cautiously as a bridged plate.
Choose the length of the plate so that at least three screws can be inserted in the most proximal fragment and three in the diaphysis.
If the fracture is very proximal or in osteoporotic bone, a preshaped olecranon LCP with locking head screws can be used to allow better fixation.
Contour the plate to fit the proximal ulna, bending around the tip of the olecranon. Make sure to follow the curvature of the olecranon.
Contouring is done with bending irons and bending press.
5 Proximal plate fixation top
Split the triceps attachment
To achieve close bone plate contact, split the triceps attachment before positioning the plate.
Proximal plate fixation
Anchor the plate with three screws to the proximal olecranon. Make sure that the screws do not protrude into the joint.
Whenever possible, insert the screws bicortically, aiming the drill to the lateral or to the medial cortex.
6 Distal plate fixation topenlarge
Distal plate fixation
Insert three bicortical screws in the distal fragment and in a divergent pattern.
Make sure to maintain contour and size of the olecranon’s articulation.
Large defects may be filled with bone graft.
7 Possible fixation of a large coronoid fragment topenlarge
Reduction of a large coronoid component of multifragmentary proximal ulna fractures can often be done through the fracture site. Provisional or definitive fixation can be placed at that time, but sometimes it helps to use a screw through a posterior plate for its fixation, as shown here. Insert this as a lag screw, as perpendicularly as possible to the fracture plane at the base of the coronoid. Smaller diameter screws may be better.
Further details of coronoid fixation
For further information on the fixation of coronoid fractures, see "Repair of coronoid fracture".
8 Pearl - Segmental resection topenlarge
In elderly patients, low demand patients, and/or severe osteoporotic bone, it may be possible to excise intermediate bone fragments. The elbow joint must be stable. Collateral ligaments, coronoid process, and distal olecranon surface must be intact.
The proximal olecranon should be rotated so its articular surface fits the trochlea, recreating an olecranon fossa. Fix with a tension band wire.